WTS: Misc. Firearms & Black Powder Parts and Accessories – Sarasota, FL – Willing to Ship.


The following items are still available:


• Unused A.R.M.S. #1 interface claw mount for HK G3/91/93/94, MP5, and SP89. The A.R.M.S. Swan G-3 locks solidly to the upper receiver of the rail while allowing use of the iron sights. The mounting platform provides the A.R.M.S. Universal weaver rail to accept both STANAG and dovetail fastenings, for day or night vision optics, and lasers. Manufactured from 4140 steel and phosphate finished black to spec DOD-16232. Note: the crossbar slots are smaller than on a regular 1913 rail. It comes with a set of unused A.R.M.S. #21 STANAG 30mm all steel rings and screws with Mil-spec phosphate finish (NSN 1005-01-469-7725) | Quantity: 1 @ $295.00 for the mount and rings

• Used factory Remington 700/40X standard Walker-style trigger assembly (without safety) (MPN 1617710) | Quantity: 1 @ $25

• ERGO A2 pistol grip plug (MPN 4933-A2-BK). This is the original design not the “Deluxe” which features the obnoxious company logo on the base | Quantity: 1 @ $3

• Unused Mil-Spec A2 birdcage flash hider, .30 caliber, 5/8 x 24” RH thread pitch. Machined from 4140 steel. Crush washer not included | Quantity: 1 @ $6

• Unused/in original sealed packaging SWFA Scopecoat XP-6, 6mm thick neoprene, Size 2XL for NightForce 60mm objective, Black, 19.5” Length (MPN SCXP 6N FB-Black) | Quantity: 1 @ $25

• Unused/in original packaging Scopecoat 3mm thick neoprene, Size Large for 50mm objective, 12.5” in length (MPN 10SC07-Black) | Quantity: 1 @ $22

• Unused Freeland universal zoom head assembly ideal for scopes that have a rotating band built into the scope body like the Kowa 821 or Konus or spotting scopes where eyepiece orientation is not necessary. Mounts to a 1/4″ x 20 thread (MPN SSA-UZA) | Quantity: 1 @ $50

• Unused Timney featherweight trigger Model Mauser 98FN, 3 lbs. pull weight (MPN 201) in original factory sealed packaging | Quantity: 1 @ $74

• Used factory Remington 700/40X standard Walker-style trigger assembly (without safety) (MPN 1617710) | Quantity: 1 @ $25

• Unused Carlson’s 12 GA Browning Invector Plus (BIP) choke tube set (SKT, IC, LM, MOD IM, and FULL) | Quantity: 6 choke tubes in the case @ $160. This item is selling online for over $200!

• Unused Carlson’s 12 GA choke tube red colored speed wrench (MPN 06601) | Quantity: 1 @ $18

• Factory Ruger Bisley wood grips feat. Ruger medallions. These grips fit the Ruger Blackhawk, Super Blackhawk, and Vaquero models with Bisley style grip frames | Quantity: 1 set @ $50

• Ruger factory wood grips feat. Ruger medallions. These grips fit the Ruger Blackhawk, Super Blackhawk, and Vaquero models with Bisley style grip frames. Small piece of the wood is chipped | Quantity: 1 set @ $35

• Ruger factory black plastic grips for Ruger Mark II (.22 LR caliber) pistol | Quantity: 1 set @ $10

• 1958 Walther P-38/P1 German black leather flap holster | Quantity: 1 @ $50

• Factory OEM Ruger 10/22 synthetic black polymer barrel band assembly | Quantity: 1 @ $6

• Marble Arms tang sight screw set for Uberti 1885 highwall rifles (.45-70 caliber), 10 x 32 (.342 OAL) and 10 x 32 (1.83 OAL) (MPN 995033) | Quantity: 1 @ $3

• Buffalo Arms Co. lower tang sight long screw for Uberti 1885 highwall rifles (.45-70 caliber) (MPN TANGSCREWLSG) | Quantity: 1 @ $4

• Uberti factory plain large 1 1/8” eyecup, 10 x 40 thread for Uberti 1885 highwall rifles (.45-70 caliber) | Quantity: 1 @ $5

• 1998 unused Brownells mainspring compression (MPN 080-927-000) to remove or install coil mainsprings on a variety of revolvers plus the Ruger No. 1 and No. 3 rifles. Comes in factory original box and instruction pamphlet | Quantity: 1 @ $40

• Ruger factory base pin assembly (3.686" overall and 3.590" without the plunger) for Ruger Blackhawk New Model (Stainless Steel) revolvers | Quantity: 1 @ $15

• Ruger factory base pin assembly (3.686" overall and 3.590" without the plunger) for Ruger Blackhawk New Model (Blue) revolver | Quantity: 1 @ $15

• Ruger factory cylinder base pin assembly (3.686" overall and 3.590" without the plunger) for Ruger Blackhawk New Model (Stainless Steel) revolvers | Quantity: 1 @ $15

• Ruger factory cylinder base pin assembly (3.686" overall and 3.590" without the plunger) for Ruger Super Blackhawk, Blackhawk, Bisley Hunter, and Vaquero (Blue) model revolvers (MPN MR02900D) | Quantity: 1 @ $6

• Unused Ruger factory base plate pin latch nut for Ruger Bearcat, Blackhawk, and Super Blackhawk Bisley (Blue) model revolvers (MPN XR02800) | Quantity: 1 @ $6

• Ruger factory firing pin for Ruger Blackhawk, Super Blackhawk, Bisley, Vaquero, Bisley Vaquero, Single-Six, Single-Six Bisley 32 H&R Magnum (Blue) model revolvers (MPN MR02100) | Quantity: 1 @ $2

• Ruger factory hammer pivot pin for Ruger Blackhawk, Super Blackhawk, Hunter, Bisley, Vaquero, New Vaquero, Bisley Vaquero, Single-Six, Single-Six (Stainless Steel) model revolvers (MPN KXR01601S) | Quantity: 1 @ $3

• British Lee Enfield No. 4 MK 2 mid to late war "L" type two-position rear sight in very good condition. Graduated for 300 and 600 yards | Quantity: 1 @ $15

• Hoppe's Expert's orange bench rest. It offers 2 1/2" of travel with adjustable anchor pins for a non-slip grip (MPN 3000). It comes with an upgraded Protektor #2 medium owl ear front bag | Quantity: 1 @ $55

• Brand new leather military sling keepers (Saddle Tan/Black hardware) featuring solid brass snaps | Quantity: 2/set @ $5/set

• QD-115 blued sling swivels feat. 1.25" loops and heavy-duty tri-lock | Quantity: 2/set @ $4/set

• QD-115 blued sling swivels feat. 1.00" loops and heavy-duty tri-lock | Quantity: 2/set @ $4/set

• SureFire M10 weapon light mount (1" Weaver picatinny mount Medium ring base and standard “female” Weaver interface built into its bottom) (MPN M10) | Quantity: 1 @ $10





Items are cross-listed on Armslist, FAL Files, AK Files, TheAKForum, Arfcom, Calguns, FN Forum, and Rokslide.



The above prices are firm and don’t include USPS shipping from Florida. I will provide no insurance for the shipment unless you specifically request insurance, and you also pay all added fees for such insurance. You accept responsibility for any loss, damage, or seizure, commencing at the time I place the package in custody of the carrier. I will cooperate in every reasonable manner in the event of any incident that may require submission of an insurance claim associated with shipping.

I am not interested in any trades. Return policy "AS IS” - No 1, 2 or 3-day inspection period, no refund or exchange. You are more than welcome to come to Sarasota, FL and inspect in person the items you are interested in purchasing.

No payment plan. No layaway. Full payment via PP (F&F) or Zelle or Money Order or Cash (by mail or if face-to-face) are the only forms of payment I accept. I don't accept Venmo, Cryptocurrency or Cashier's Checks. Deadline for receipt of funds is five (5) business days. You can read the 100% positive online feedback I received since 2001 as a Seller and a Buyer on FAL Files, AK Files, Arfcom, and Calguns under the username Yahamshari. My reputation is more valuable than money.